CULTIVATORS

KVERNELAND CLC EVO STUBBLE CULTIVATOR

  • Welded Frame 2 row concept
  • Front and rear beam 100 x 100 mm tube x 8 mm thick
  • Distance from front to rear beams 900 mm
  • Tine spacing average 265 mm
  • Unique leg design vibrating for intensive effect in the soil
  • 350 mm working depth and Low kW requirement +/-10 kW per tine
  • Tine flexibility 200 mm each way
  • 640 kg Tine breakaway
  • 870 mm under beam clearance
  • 80 mm Knock-on Standard
  • Optional rear roller
  • Compact machine for tractors with low lifting capacity
  • Seedbed finish possible
CatalogDownload

KVERNELAND CLC PRO STUBBLE CULTIVATOR

  • Welded 3 frame concept, heat treated
  • Working width from 3.0 to 5.0 m, working depth from 50 mm to 350 mm
  • 3 bar frame for optimum mixing & blockage free operation
  • Tine spacing 280 mm to 290 mm & easy to adjust, low power requirement 9 to 14 kW per tine
  • Auto reset spring pack with 640 kg breakaway
  • Due to fantastic hollow tine technology the tine can move 140 mm from each side
  • Unique tine design vibrating for intensive effect in soil low fuel consumption
  • Knock on system standard point 80 mm with wear plate
  • Optional Knock on wing shear 150 mm, 250 mm or 320 mm
  • Equipped with a single disc gang with local cage roller for seedbed finish
CatalogDownload

KVERNELAND CLS 2 STUBBLE CULTIVATOR

  • Bolded Heat Treated Beam
  • Front and rear beam 100 x 100 mm tube x 8 mm thick
  • Distance from front to rear beams 1470 mm
  • Unique leg design vibrating for intensive effect in the soil
  • 450 mm working depth
  • kW requirement +/- 15 kW per tine
  • Tine flexibility 200 mm each way
  • 1050 kg Tine breakaway on the point
  • Under beam clearance of 870 mm
  • Wear plate standard with 80 mm Knock-On point
  • Long leaf spring Non stop Auto Reset, set at 690 mm
  • Standard 7 + 2 No:5 Spring pack (Auto Reset)
  • Adjustable tine spacing
  • Intensive mixing and good residues flow
CatalogDownload

KVERNELAND CTS STUBBLE CULTIVATOR

  • Heat treated frame design with 3 rows of tines
  • Working width from 4.0 to 6.0 m, Working depth from 50 mm to 350 mm
  • Under beam clearance of 870 mm
  • Four working zones: 1. front cutting / mixing disc 2. ripping 3. mixing disc / combi disc 4. roller- levelling / seed bed
  • Tine spacing 270 mm for blockage free operation. Auto reset spring pack with 640 kg breakaway
  • Due to fantastic hollow tine technology the tine can move 200 mm each side
  • Unique tine design vibrating for intensive effect in soil low fuel consumption
  • Knock on system standard point 80 mm with wear plate
  • Optional Knock on wing shear 150 mm, 250 mm or 320 mm
  • Intensive mixing and good residues flow. Equipped with local cage roller for seedbed finish
CatalogDownload

KVERNELAND CTS MAXI CULTIVATOR

  • Heat treated frame design with 4 rows of tines for intensive mixing and good residues flow
  • Working width from 10.0 to 12.0 m
  • Under beam clearance of 870 mm
  • Tine spacing 365 mm for blockage free operation
  • Working depth from 50 mm to 350 mm
  • Auto reset spring pack with 640 kg breakaway
  • Due to fantastic hollow tine technology the tine can move 140 mm each side
  • Unique tine design vibrating for intensive effect in soil low fuel consumption
  • Knock on system standard point 80 mm with wear plate standard
  • Optional Knock on wing shear 150 mm, 250 mm or 320 mm
CatalogDownload

KVERNELAND A DRILL

  •  200 litres used in combination with the CLC PRO
  • a-drill 200 can be driven electrical or hydraulically
  • 8 outlets which spreads flow of seeds evenly over working width
  • Precision and high work output
  • Seed rate can be adjust from the cab also during work
  • Economical crop establishment
  • 2 different control boxes Standard & Speed regulation
  • Fans adapted to seeds, working speed & width
  • Different seed metering rotors for all conditions
CatalogDownload

ROLLERS

  • Rollers are mainly used to break up clods, level and seal in moisture and prepare seedbeds
  • These rollers are very robust and easy to maintain

KNOCK ON SYSTEM

Just like our ploughs, using a hammer and ejector, the newly Patented system allows you to quickly change the points without the need for undoing nuts and bolts – saving up to 30 minutes on a 3 m machine with 9 tines. The Knock-on system has an advantage of adding an extra 50 mm working depth to the implements.

CatalogDownload